The DIMAX multipurpose racking extends the wide range of Armes products and is characterised by its flexibility and ability to adapt, also in the long term, to different user requirements.This racking comes in four models (D10 – D20 – D30 – D40) according to the characteristics of the load unit to be stored. Model D20 is particularly suitable for storage of non-palletised items and in the case of manual deposit/retrieval operations. The vertical supporting element consists of the sides obtained by connecting two T-shaped uprights with eight folds by means of self-locking quick connection link bars. According to the heights and capacities required, the sides are provided with metal or PVC supporting feet. With the model D20, structures up to 6,000 mm high can be built, with the possibility of a passageway level , and maximum capacity of 22 kN (2,200 kg). The sides can be fitted with the patented Z-shaped shelving by means of innovative tapered shelf clips. Their characteristic section eliminates the need for electrical welding or spot welding, normally used in products of this type. The Z-shaped shelving can be supplied galvanised or painted, smooth or perforated. The use of cross bracing is a further guarantee of safety. Lastly, the wide range of accessories available permits customisation of the structure obtained to suit many different needs.

Accessories	longitudinal plates, clothes hanger tubes, side panels, backs, shelf reinforcements, door pairs, drawer units,cross bracing, containers, dividers
Available finishing	Powder painting: uprights and (only in light grey) shelves, containers, chest of drawers, dividers for regular shelves, dividers for perforated shelves, side panels, back panels and pair of doors.  Sendzimir galvanising: uprights, link bars, shelf clips, cross bracings, shelves, longitudinal plates, containers, clothes hanger tubes, dividers for perforated shelves, side, back panels and pair of doors.
Shelf type	Blue (RAL 5010), yellow (RAL 1007), green (RAL 5021), dark grey (RAL 7016), light grey (RAL 7035)
Frame height	from 2.000 mm to 6.000 mm
Frame depth	from 300 mm to 800 mm
Upright width	45 mm
Upright thickness	1,2 mm
Frame load capacity	up to 22 kN (2.200 kg)
Shelf length	from 600 mm to 1.500 mm
Shelf load capacity	up to 3,7 kN (370 kg) u.d.l

CALCULATION
The load capacities of the various parts of the structure take into account the weight of the structure itself and the effective load and are based on the hypothesis of a uniformly distributed load (u.d.l.). Calculation of the load capacity of the frames takes account of the relative working conditions, considering the number, position in height of the shelves, the presence or absence of vertical bracing and floor anchorage characteristics. These capacities are calculated with the aid of an automatic code developed expressly for the evaluation of shelving. Deflections of the shelves that make up dimax multi-purpose shelving are within 1/200 of the span. The tests carried out and the entire set of algorithms used for the procedure comply with the most authoritative framework of standards and recommendations applicable in Italy and on a European level, including: • UNI ENV 1993-1-1:1994 and UNI ENV 1993-1-3: 2000 (Eurocode 3 – Steel structures design); • CNR-UNI 10011:1997 (Steel constructions: instructions for the calculation, the execution, the test and the maintenance); • CNR 10022:1998 (Cold profiles: instructions for the use in the constructions); • UNI-En 10204 August 1991 (Metal products. Types of control documents); • F.E.M. (Fédération Européenne de la Manutention) recommendations. Application of the automatic code was supported by a prior series of experimental tests performed at university laboratories and designed to assess the principle geometric and physical parameters

IMAGE GALLERY